Hoja completa de tira de leds Neopixel
265 leds dentro
900mm x 25,4mm x 1,4mm de pared
Pared delgada , menor peso
Hoja punta de Bala
Free Hilt Side connector 1"
1 Artículo Artículos
Advertencia: ¡Últimas unidades en stock!
Fecha de disponibilidad: 31/01/2018
CO-LADA Works on any Neopixel capable soundcard in the market, as Spark 2, Nano Biscotte v4, Primz, Igniter, Tennsy Saber, etc
CO-LADA Neopixel "show" blade. Its light is impresive but is mandatory to have a good battery or, the blade will drain the battery in minutes. Also shadows or black zones are visible if you look carefully, more visible is in blue color, in Green or Red the shadows is near invisible, but trust me, the blade is near perfect. I you look the blade form 30cm (12") you cant see any shadow zones, if someone is telling you that in a 2strip (back to back) blade you will not see shadows in close inspection is lying you.
This blade is only 2 strip so is better for battery than my TRI-LADA Blade.
This blade is intended for show, as the wall is 1,4mm
The blade is made of:
2x Strip Neopixel Leds, 1 Strips have 127 neopixel leds and the other have 128 neopixel led, the extra led is pointed to tip, so full blade is iluminated. So you have a total of 265 neopixel leds working for you.
More than 3 meters of several materials to obtain prefect light diffusion
The oulside blade is a 1,4mm walled blade with pointed tip. This Blade is not Duel Ready, but you can perform some light contact duel
Lathe machined hollow tip, so tip is fully iluminated.
The connector is a Neowars male connector, please read the guide for pinout and solder diagrams, and how to. HERE.
I can make this blade in other lengths at same Price, please contact me to tell me your requirements, but you have to wait 2-4 weeks to make. If not the 900mm long is ready to send.
Just 13mm no light in connector zone. So is perfect for thin neck sabers also.
The blade weight is 200gr
Free Hilt Side Connector 1"