Spark 3

Introducing Spark 3™, the top-tier board with entry-level pricing. Spark 3 combines a true 16bit DAC with MotionSense V2, the same beloved motion recognition of Igniter 3™, and pairs it with RGB color mixing. Features normally reserved for the highest models, now available for an affordable price.

Simple Color Mixing

Spark 3™ supports RGB color-mixing, allowing one hilt to support dark users, light users, or anything in between. Each of the three fonts can choose a blade color, clash/lockup color, and blast color for a total of nine unique colors.

Pixel Support

Spark 3™ supports WS2812B and compatible strips. For the brightest and most even blade, you don’t need to pay a fortune to drive it.

Saber Tracks™

Saber tracks allows playing all the classic songs right from the saber. Moreover, the blade with the pulse effect can be turned on while the music is playing, allowing for a fun saber experience.

Cross-guard Support

With Spark 3™, it is possible to use a saber with two smaller side blades with delayed ignition, without any additional hardware. The side blades and main blade will be a single color, but can support a second flash color as well for the classic clash-flash.

Spark 3™ Videos

Features

The following is a list of the most exciting features of Spark 3™.

• True 16bit, 22050Hz DAC for sound normally reserved for high-end boards.
• Same Motion Sense V2 Swing/Slash and Clash recognition as on Igniter 3™.
• RGB color-mixing.
• 3 sound fonts, each supporting a unique blade, blast, and clash/lockup color.
• Saber Tracks™, a music/wav player to play up to 99 songs and sounds with the ability to enable the blade pulse.
• Cross-Saber allows support for delayed ignition of secondary blades with no additional hardware.
• Blaster Blocks and Clash/Lockup effects with each having a separate settable aux flash value.
• 3 accent pads that can be sequenced per mode with one of the 16 pre-configured values.
• 99 sounds per bank.
• Can be configured to work with only one momentary button, with all features still accessible.
• Runs on a single 3.7v battery for maximum space savings.
• Board dimensions: 2.07”x0.85”x0.023”; 1.75”x0.85”x0.023” with the TruDrive removed.